Revamp Your Space: Installing Stone Veneer Over Brick

Revamp Your Space: Installing Stone Veneer Over Brick

Revamping your space by installing stone veneer over brick can greatly enhance the appearance of your home. Stone veneer provides a natural and timeless look, and it can be applied directly to existing brick surfaces with the right preparation and techniques. Here’s a step-by-step guide to help you install stone veneer over brick:

Tools and Materials Needed:

  1. Stone Veneer: Choose the type of stone veneer that suits your style and budget. It comes in various styles and colors, so select the one that complements your home’s architecture.
  2. Mortar: Use mortar specifically designed for stone veneer installation.
  3. Metal Lath: Provides a surface for the mortar to adhere to.
  4. Scratch Coat: A layer of mortar applied to the brick to create a rough surface for better adhesion.
  5. Wire Mesh: To hold the mortar in place.
  6. Cement Board: Optional, but it provides a stable surface for the stone veneer.
  7. Trowels: For applying mortar.
  8. Bucket and Mixer: For mixing mortar.
  9. Masonry Nails: To secure the metal lath and wire mesh.
  10. Safety Gear: Gloves, safety glasses, and a dust mask.


1. Prepare the Surface:

  • Clean the brick surface thoroughly to remove dirt, dust, and loose mortar.
  • Repair any damaged bricks or mortar joints.

2. Install Metal Lath:

  • Attach metal lath to the brick using masonry nails. Ensure it is securely fastened and doesn’t wobble.

3. Apply Scratch Coat:

  • Mix the mortar according to the manufacturer’s instructions.
  • Apply a scratch coat of mortar over the metal lath. This should be about 1/2 inch thick.
  • Use a scratch tool or a comb trowel to create a textured surface on the scratch coat. This texture helps the stone veneer adhere better.

4. Install Wire Mesh (If Required):

  • Install wire mesh over the scratch coat for additional support. Secure it with masonry nails.

5. Apply Mortar for Stone Veneer:

  • Spread a layer of mortar on the back of each stone veneer piece.
  • Press the stone veneer pieces firmly onto the scratch coat, holding them in place for a few seconds to ensure a strong bond.
  • Leave a small gap between the stones for grout if you prefer a grouted look.

6. Cut and Trim Stones:

  • Use a wet saw or a grinder with a diamond blade to cut stones to fit corners and edges.

7. Grouting (Optional):

  • If you’ve left gaps between the stones, fill them with grout to create a seamless appearance.

8. Clean and Seal:

  • Clean off any excess mortar or grout from the surface of the stones.
  • Apply a stone sealer to protect the veneer and enhance its natural color.

9. Finish and Maintain:

  • Let the veneer set for the time recommended by the mortar manufacturer.
  • Periodically check for loose stones and re-adhere them with mortar if necessary.

Remember, if you are unsure about any part of the process, it’s advisable to consult with a professional or hire a contractor to ensure the job is done correctly and safely. Installing stone veneer can significantly transform your space, giving it a fresh, natural look that will last for years to come.